$7.00
STL 3d models for Captain Gangplank gun and cutlass from League Of Legends, based on details referenced from the game model.
Includes various STL and print options.
These props are rather large just like the reference, will fit 3dprinters with minimum 250 x 250 x 280mm build volume.
STL files are already scaled and orientated in the best print quality orientation. For some parts you will need some supports.
Do you need these props printed for you? Email me for a quote!
Description
STL 3d models for Captain Gangplank gun and cutlass from League Of Legends, based on details referenced from the game model.
Includes various STL and print options.
These props are rather large just like the reference, will fit 3dprinters with minimum 250 x 250 x 280mm build volume.
STL files are already scaled and orientated in the best print quality orientation. For some parts you will need some supports.
Do you need these props printed for you? Email me for a quote!
Recommended post-processing for the smoothest results:
The blade has a 33mm diameter, 240mm cylinder for a handle that is included as a 3dprint. You can replace this handle.stl 3dprint with a regular pvc pipe of the same length and diameter. It matches the 1 inch diameter charlotte schedule 40 pvc pipe from Home depot (outside diameter, the 1 inch nominal is for inside).
If you plan to paint these, I recommend sanding the parts before gluing them together with 2 part epoxy glue or superglue (with accelerant).
Sand your 3D prints using 100-150 grit sandpaper, with royal use of primer or filler spray in-between to get a smooth surface. When you’re satisfied with the results, your last layer should be a primer spray, before painting it with acrylics, spraypaints etc. Protect your paintjob with a varnish spray in satin or gloss.
The 3d models are made by me. These files are packed in a ZIP folder, you need to extract the files correctly to be able to use them, if you have problems doing so, please contact me.
Non/commercial license information: You may not resell or distribute these files in any way. You may not sell 3D prints (such as raw 3d kits) made using these files, with the exception of custom (one-time) commission requests.
Disclaimer: Any rights are reserved for the copyright holders. This is a fanmade item, I am not in any way an official reseller or licensed by the relevant IP owners.
