STL models Lilith accessories (Diablo 4)

$16.00

3D print models (STL files) for 3d printing. Does not include the armored corset! The files are packed in a zip folder. If you do not extract the files, the models will not work!

IMPORTANT: licensed Creative Commons – Non Commercial/No Derivatives (nc/nd)
You are not licensed to sell products made using this STL! More information below.

Printing instructions:
The STL files are ready to print, and are already oriented for an optimal 3d print result. Contains one-side pieces only, use the mirror option in your slicer to get the other side.

More information below:

Description

3D print models (STL files) for accessories for Lilith from Diablo IV. Does not include the armored corset!
Includes the designs for the shoulder, neck collar, arm cuff, corset button, belt decorations, horn tiara on the backside, and 6 unique tail pieces + the tail end.
Neck circumference: 31cm
Armcuff circumference: 27cm
Contains one-side pieces only, mirror it in your slicer to get the other side.
Get the lilith horns EVA foam pattern here (not suitable for 3dprinter): https://willowcreativ.com/store/lilith-horns-foam-pattern/
Or the lilith horns STL pattern (for the 3dprinter): https://willowcreativ.com/store/stl-models-lilith-horns/

IMPORTANT: licensed Creative Commons – Non Commercial/No Derivatives (nc/nd)
You are not licensed to sell files or 3dprints made using this design! More information below.

Printing instructions:
There are a few designs that need to be printed multiple times in different sizes: the corset button and the skirt flaps. You need 10 skirt flaps, recommend printing 2x 100% scale, 2x 95% scale etc etc. You need
The largest STL is 205×205 mm wide. If you need your files cut up, please email and i’d be happy to do that for you if you provide your printer volume.
The STL files are ready to print, and are already oriented for an optimal 3d print result.
You may want to print the neck piece in flexible filament (TPU) to fit, or use it as a mould for rubber. You need to cut the neck piece with a dremel to open it up.
If you need to resize the neck or arm pieces to fit, measure your own circumference first then scale up or scale down the pieces proportionally with the measurements listed above.

Finishing instructions:
Use epoxy glue, superglue etc to glue pieces together.
There’s a hole in each tail piece to thread iron wire, large zipties, elastic rope etc to make the tail connect.
Use a ring such as a curtain rod ring or foam rod ring to make the belt complete.
Use 150 grit sandpaper and/or filler primer spray/spot putty to smooth a 3dprint before painting. Go up to 400-600 grit for a smoother result. Spraypaint can be used to paint any 3dprint, or other paints such as acrylics or airbrush.

 

The 3d models are made by me. The file is packed in a zip file. This can be unpacked/extracted by most operating systems without the need of additional applications into your useable STL files, using your rightclick file menu. If you do not unpack them, the models will not work!

Extra license information Creative Commons – Non Commercial/No Derivatives (nc/nd): You may not share, change and sell the digital files or sell 3D prints made using these files. You may use the files, 3dprints and moulds made using them, for personal use, media content use and made-to-order commissions only, not for mass-production sales. Do not claim the design as your own. Attribution should be given at least once if your project is published: mention Willow Creative as the designer in your project description. Social media tags are appreciated!