You may custom order 3dprints from me if they fall under the following categories:
STL or 3d design made by me.
Swords and blades requiring a single piece 3dprint over 400mm (such as translucent pieces without seams)
Foam TPU prints in Varioshore TPU, SirayaTech TPU air or other foam tpu.
Limited other 3d designs (see bottom)
Inquire for your 3dprint via email: i……@willowcreativ.com
Include your 3d model, service and material request and shipping address. 3D model must be a download link, public cloud share link, or included as attachment.
Price:
PLA/PETG: 0.15USD for each 1 gram of filament with a minimum of 15USD.
Foam TPU: 25USD + 0.25USD for each 1 gram of filament. Note that foam TPU parts are 30% to 50% less weight than the same part in regular filament.
Does not include shipping fee.
For example, a set of horns, approx 100 grams of filament each (200 grams total) in PLA/PETG costs 30USD total. If you wish to have the same 200 grams weight 3dprinted in foam TPU, it is 75USD total (it may be less for the exact same model, as foam TPU is printed at lower weight, so it is likely closer to 50USD).
Weight cost is based on complete print prediction including waste material such as supports for complex designs.
Price does not include 3d modeling work. If your 3d model is not suitable for 3dprinting (such as terrible design philosophy or manifold geometry) it may be refused or cost extra to adjust. Not all 3d designs are suitable for full length blades or foam TPU.
I do not design 3d models for sale/custom print work unless I get your consent to add the design to my webshop afterwards (such as horns or masks that fall within my style). It takes dozens of hours to create a 3d design and would be extremely expensive to commission as a private order!