Valeera’s daggers 3D printed (World of Warcraft)

Willow Creative > Products > Valeera’s daggers 3D printed (World of Warcraft)

Price range: $40.00 through $240.00

This listing sells the daggers per pair!

Valeera Sanguinar’s daggers, based on the appearance in World of Warcraft: Midnight. The daggers are 3d printed in gold and transparent green filament. Filament color may vary slightly based on availability. A single dagger has an assembled length of 80cm and weighs about 250g.
The green blade is separate from the handle to access electronics/battery and reduce the size for shipping, and clicks into the handle.
Note that these are decorative props for display only and they should not be used to swing at anything.

Option:

Pair of blade: You will get 2pcs of green transparent blades. Each blade weighs about 75 grams, is 50cm in length and 2cm thick at the widest point.
Great for DIY cosplayers when you want a hollow and transparent lightweight blade, but you want to make the rest yourself.

Pair of daggers: Raw 3dprinted parts to create two daggers, without electronics. This option includes 2pcs cut green blades, 2pcs handle, 3dprinted gems.
You’ll need to do LEDs, sanding and paint yourself if desired.

Pair of LED daggers: Raw 3dprinted parts to create two daggers, with included green colored 5V LED strip and usb-A plug. This option includes 2pcs cut green blades, 2pcs handle, 3dprinted gems.
You’ll need to do sanding and paint yourself if desired. Battery is not included, recommended battery (you will need one for each dagger).
This option is shown in the photos.

Pair of animated LED daggers: Raw 3dprinted parts to create two daggers, with included addressable 5V LED strip and usb-A plug. See below for LED details. This option includes 2pcs cut green blades with the leds, 2pcs handle, 3dprinted gems.
You’ll need to do sanding and paint yourself if desired. Battery is not included, recommended battery (you will need one for each dagger)

SKU: N/A Category: Tags: , , , , , , , , , , ,

Description

 

Electronics information:
You need to purchase one usb powerbank for each dagger. The maximum diameter of the battery should not exceed 27mm. Only round powerbanks fit. These are the recommended batteries.

Animated LEDs: Each dagger will have addressable led strips and a microchip (Arduino Nano Every) installed. This chip is pre-programmed with a standard boot-up crawling led animation, and then powers the leds with an animated green glow. You can easily upload other led patterns, including rgb/rainbow etc, found online in Arduino Neopixel examples through the mini-usb port found on the chip with the application Arduino.

 

My props and accessories are all designed and assembled 1 by 1 by myself. They are not suitable for children, only for use as prop and display. Do not use for active LARP fights, it is possible they may break.

Production time is usually around 1-2 weeks as most items are 3dprinted to order. Shipping time may vary based on your location and chosen shipping service. Please contact by email if you need something quickly, maybe your desired item is already in stock and can be shipped quicker for you. All products are shipped from Florida, USA.

Returns and exchanges:

You can return any item without reason within 30 days after your purchase has been marked as delivered. Buyer is responsible for return shipping costs and any loss in value if an item isn’t returned in original condition. Original shipping costs will not be reimbursed unless there was a mistake on behalf of the shipping service.
Any other return reason (such as a defect during shipping or production) will be 100% reimbursed or replaced if communicated within 30 days after your purchase has been marked as delivered. No compensation is offered for any missed deadlines or delays due to such a reason. Defects due to incorrect handling are not covered.

Additional information

Weight N/A
Option

Pair of blades, Pair of daggers, Pair of led daggers, Pair of animated led daggers

Related products