$16.00
3d printable models for a fox fursuit head, based on the shape for Chase’s fox fursuit from GTA VI.
Includes various STL and 3mf with premade settings for Orcaslicer and Bambustudio. Need other settings? Email me.
Will fit 3dprinters with minimum 300 x 265 x 280mm build volume at 100% scale, suitable for 24 to 25inch head circumference.
Recommended to print in (high flow) TPU with infill settings only, and PLA or PETG for the eye pieces. Open the 3mf with your associated slicer and change the machine to your own. Adjust if necessary.
Description
3d printable models for a fox fursuit head, based on the shape for Chase’s fox fursuit from GTA VI.
Includes various STL and 3mf with premade settings for Orcaslicer and Bambustudio. Need other settings? Email me.
Will fit 3dprinters with minimum 300 x 265 x 280mm build volume at 100% scale, suitable for 24 to 25inch head circumference.
Recommended to print in (high flow) TPU with infill settings only, and PLA or PETG for the eye pieces. Open the 3mf with your associated slicer and change the machine to your own. Adjust if necessary.
STL included:
Fox head base
Fox head base variant with modifiers for customized printing such as headband holes, nose and eyebrow settings, ear markings etc.
Suitable slotted eye pieces (pupil is open gap)
Nose
Ears
STL files are already scaled and orientated in the best print quality orientation. For some parts you will need some supports.
Do you need these parts printed for you? Email me for a quote!
Recommended steps to complete your fox fursuit head:
Print all parts in TPU except for the eye pieces, in your preferred rigid filament.
Sand and paint the eye pieces, then glue in mesh fabric that was painted or using markers to create the pupil colors.
Cover the tpu parts in faux fur fabric, or minky/fleece/felt for the nose, eyebrows, and to create teeth and gums. Use dog trimmers to cut long faux fur shorter around the nose and face.
Add additional upholstery foam to the back of the head if necessary to smooth or round out.
Add elastic band of 1 inch or wider to the back of the head, and maybe some fleece or padding for inside the head to fit it better to your face.
The 3d models are made by me. These files are packed in a ZIP folder, you need to extract the files correctly to be able to use them, if you have problems doing so, please contact me.
Non/commercial license information: You may not resell or distribute these files in any way. You may not sell 3D prints (such as raw 3d kits) made using these files, with the exception of custom (one-time) commission requests.
Disclaimer: Any rights are reserved for the copyright holders. This is a fanmade item, I am not in any way an official reseller or licensed by the relevant IP owners.











