Chainmail STL for resin printers

Download is available until [expire_date]
  • Version
  • Download 328
  • File Size 0.00 KB
  • File Count 1
  • Create Date 04/10/2022
  • Last Updated 05/04/2023

Chainmail STL for resin printers

Supported STL for 4-weave chainmail of standard round ringed chainmail with a slight curvature. These work great for MSLA resin printers! Tested on my Phenom resin printer, includes a piece of chainmail scaled exactly to the Phenom build volume (large size resin printer), one scaled for anycubic mono X (medium size resin printer) and a smaller test piece size which you can multiply and link together. If your 3d printer does not match the sizes exactly, let the excess overhang and slice as usual. The half printed rings on the edges should peel right off.

DO NOT use any support or raft settings, print as-is. Slice and write time may take a long time due to the number of meshes

Recommended to use tough/tenacious type resin or a mix of it if you plan on using this for a costume etc, so the connections don't break easily.

Join multiple sheets together by clipping the rings on the edge, hook them into another sheet, and then cure using an UV flashlight before cure (or after cure if you use a toothpick with some extra UV resin from the bottle). Or simply sew them together with some thread or floral wire etc.