STL 3d models for a bunny-style masquerade mask, inspired by Spirit Blossom Evelynn and Bioshock etc. Includes the mask, the left ear and pegs to glue the ears properly.
Recommended print settings:
The STL files are ready to print, and are already oriented for an optimal 3d print result. Add standard supports and you may want to float the ear and mask to get a sharper bottom edge. Recommended at least 4 walls and 10% infill.
The pieces can be glued together with superglue, I recommend using an accelerant spray to ensure a strong and quick connection. You can also use glue suitable for 3dprints or epoxy glue.
Sand your 3D prints using 100-150 grit sandpaper, with royal use of primer, spot putty or filler spray inbetween to get a smooth surface. Work your way up to higher grits if you desire a smoother or glossy result. When you're satisfied with the results, your last layer should be a primer spray, before painting it with acrylics. Protect your paintjob with a varnish spray in satin or gloss.
Glue ribbon or fabric to the edges with hotglue to wear the mask. For better adhesion, sew a larger piece of felt or other high absorbant fabric to elastic band or ribbon, and sand the attachment place on the mask before you glue the headband.
The 3d models are made by me. These files are packed in a ZIP file, you need to extract the files correctly to be able to use them, if you have problems doing so, please contact me.
You may not resell or distribute these files in any way. Not allowed for commercial use: You may not sell 3D prints or casts created in moulds made using these files, with the exception of limited quantity (one-time) such as commissions.