$12.00
3D print models (STL files) of a Thor helmet and wings, inspired by the helmet worn by Jane Foster in the trailer for Thor: Love and Thunder. Details were supplemented from images of figures produced for the movie.
IMPORTANT: licensed Creative Commons – Non Commercial/No Derivatives (nc/nd)
You are not licensed to sell raw 3dprint kits made using this STL!
Printing instructions:
The STL files are ready to print, and are mostly already oriented for an optimal 3d print result.
All parts can be nicely printed using 3-4 walls and 15% infill and standard support settings.
Description
3D print models (STL files) of a Thor helmet and wings, inspired by the helmet worn by Jane Foster in the trailer for Thor: Love and Thunder. Details were supplemented from images of figures produced for the movie.
IMPORTANT: licensed Creative Commons – Non Commercial/No Derivatives (nc/nd)
You are not licensed to sell raw 3dprint kits made using this STL!
Printing instructions:
The STL files are ready to print, and are mostly already oriented for an optimal 3d print result.
All parts can be nicely printed using 3-4 walls and 15% infill and standard support settings.
Finishing instructions:
The helmet is sized for 22 inch head circumference. Scale up ~5% if 23-24 inch head circumference.
The wings include slots to mount it into the helmet easily, but these still need to be glued for the final assembly.
Use 150 grit sandpaper and filler primer spray to smooth a 3dprint before painting. Go up to 400-600 grit for a smoother result. Spraypaint can be used to paint any 3dprint, or other paints such as acrylics or airbrush.
The 3d models are made by me. The file is packed in a zip file. This can be unpacked by most operating systems without the need of additional applications into your useable STL files. If you do not unpack them, the models will not work!
License information: You may not share, change and share, sell the digital files or sell 3D prints made with it. You may use the files for personal use and single-use commissions only. Attribution must be given at least once if your project is published, and used these files: mention Willow Creative in your project description.
