$8.00
3D print models (STL files) horns, hip pieces and nails, styled for Coven Ahri from League of Legends.
The STL files are ready to print, and are already oriented for an optimal 3d print result. The ears and hip pieces are designed flat for easiest printing results, and you can use a hot air gun to shape it to yourself. Make sure your infill is decent (15% or more) or it may show through the surface after heating it. Or 3dprint it with 0% infill, but make sure you double up your walls to make up for lost strength.
Description
3D print models (STL files) horns, hip pieces and nails, styled for Coven Ahri from League of Legends.
The STL files are ready to print, and are already oriented for an optimal 3d print result. The ears and hip pieces are designed flat for easiest printing results, and you can use a hot air gun to shape it to yourself. Make sure your infill is decent (15% or more) or it may show through the surface after heating it.
Printing instructions:
All parts can be nicely printed using 3-4 walls and 15% infill and standard support settings.
Finishing instructions:
The horns and hip pieces are flat on the bottom, use a heatgun to soften it and press it against your head and body for optimal shape.
The horns includes pegs, so you can sew them into a wig. The pegs are suitable for 12x2mm magnets.
Sand your 3D prints using 100-150 grit sandpaper, with royal use of primer or filler spray inbetween to get a smooth surface. When you’re satisfied with the results, your last layer should be a primer spray, before painting it with acrylics, spraypaint or other paint of your choice. Protect your paintjob with a varnish spray in satin or gloss.
The 3d models are made by me. The file is packed in a zip file. This can be unpacked by most operating systems without the need of additional applications into your useable STL files. If you do not unpack them, the models will not work!
License information: You may not share, change and share, sell the digital files or massively sell 3D prints made with it. You may use the files for personal use and single-use commissions only. Attribution must be given atleast once when your project is made using these files: mention Willow Creative in your project description.
