Invisible headband for attaching horns to wigs

Invisible headband for attaching horns to wigs. I use this to attach my Karlach horns to my wig. Can be used to drop horns down your forehead or just for regular horns on top of the head.
You have to print it flat then use a heatgun to shape it to the top of your head.
Use the holes to sew it to the inside of your wig (or just hotglue it in) and make two small holes in your wigcap to stick the cubes through. Make sure its symmetrical and properly in the center of your wig or your horns will be lopsided quite easily.
There's approx 2mm gap between the cubes and the fitting slots to glue in two magnets to keep the slot in place but it also depends on the thickness of your wig. The slots go inside your horns, can be eva foam horns or 3dprinted horns etc. For 3dprinted horns to make a fitted slot in the slicer before 3dprinting so you dont have to cut and glue them in: rightclick your horn 3d model in the slicer add "negative part, cube" and size it to 15x15x15mm. Position the cube where you want your slots, then slice and print as normal with the fitting slots premade in your horns.

STL files are packed in a zip archive as STL file extension isnt accepted by my website. You have to extract it using winzip, 7zip etc to be able to use the file.