STL models Snow Owl Ana

$11.00

3D print models (STL files) of the mask styled for Snow Owl Ana from Overwatch. The design includes separate eyes with slots to embed EL wire for glowing eyes. Clips are printed separately and can be used to install foam feathers. Slots are designed into the mask on the sides to easily install elastic band to wear the mask.

IMPORTANT: licensed Creative Commons – Non Commercial/ No Derivatives (nc/nd)
You are not licensed to sell raw 3dprint kits made using this STL.

Printing instructions:
The STL files are ready to print, and are mostly already oriented for an optimal 3d print result.
All parts can be nicely printed using 3-4 walls and 15% infill and standard support settings.

In stock

Description

3D print models (STL files) of the mask styled for Snow Owl Ana from Overwatch. The design includes separate eyes with slots to embed EL wire for glowing eyes. Clips are printed separately and can be used to install foam feathers. Slots are designed into the mask on the sides to easily install elastic band to wear the mask.

IMPORTANT: licensed Creative Commons – Non Commercial/ No Derivatives (nc/nd)
You are not licensed to sell raw 3dprint kits made using this STL.

Printing instructions:
The STL files are ready to print, and are mostly already oriented for an optimal 3d print result.
All parts can be nicely printed using 3-4 walls and 15% infill and standard support settings.

Finishing instructions:
Start with 150 grit sandpaper to smooth out a 3dprint, use filler primer spray or filler putty inbetween to fill gaps and lines. Once satisfied, move to higher grit for a smoother finish if desired.
Paint, then install an elastic band with a sewing machine to the slots to the side of the mask and glue the eyes and feathers to the mask.

 

The 3d models are made by me. The file is packed in a zip file. This can be unpacked by most operating systems without the need of additional applications into your useable STL files. If you do not unpack them, the models will not work!

License information: You may not share, change and share, sell the digital files or sell 3D prints made with it. You may use the files for personal use and single-use commissions only. Attribution must be given at least once if your project is published using these files: mention Willow Creative in your project description.

Instagram