$11.00
STL 3d models for Leblanc’s staff from League of Legends, based on the 2025 VGU game 3d model, with some added details seen in the splash art.
STL files are already scaled and orientated in the best print quality orientation.
These pieces are very large and can be printed in various cuts (included) for the best result, but a large volume 3dprinter of at least 240mm cubed, is recommended.
You can also get the pieces printed for you, including a hollow translucent red rose in one piece suitable for lights and special effects. Please email for these!
Description
STL 3d models for Leblanc’s staff from League of Legends, based on the 2025 VGU game 3d model, with some added details seen in the splash art.
STL files are already scaled and orientated in the best print quality orientation.
These pieces are very large and can be printed in various cuts (included) for the best result, but a large volume 3dprinter of at least 240mm cubed, is recommended.
You can also get the pieces printed for you, including a hollow translucent red rose in one piece suitable for lights and special effects. Please email for these!
Recommended post-processing + additional hardware to complete the staff:
You need a 25mm rod for the staff handle, approximately 140cm long (1 inch diameter, 55 inches long).
You can use 1 inch tension rod in black for an easy staff that can be collapsed.
There’s a gap for a 7mm rod to attach the rose to the staff base.
All pieces have offset slots for easy assembly, but it does require glue.
You can use superglue (with accelerant), epoxy or any other strong glue you like.
Sand your 3D prints using 100-150 grit sandpaper, with royal use of primer or filler spray in-between to get a smooth surface. When you’re satisfied with the results, your last layer should be a primer spray, before painting it with acrylics, spraypaints etc. Protect your paintjob with a varnish spray in satin or gloss.
The 3d models are made by me. These files are packed in a ZIP folder, you need to extract the files correctly to be able to use them, if you have problems doing so, please contact me.
Non/commercial license information: You may not resell or distribute these files in any way. You may not sell 3D prints (such as raw 3d kits) made using these files, with the exception of custom (one-time) commission requests.
Disclaimer: Any rights are reserved for the copyright holders. This is a fanmade item, I am not in any way an official reseller or licensed by the relevant IP owners.
