STL model Fang Prime (Warframe)

Description

STL 3d models for the Fang Prime daggers from Warframe. The handle and blade is hollow, including all areas with emissive lights, so leds can be installed inside if desired.
Scaled to 57 centimeters long.
STL files are pre-cut, the gold parts on the handle are separated, and there’s also a full-size blade model that can be cut the way you want to.
To fill the emissive areas, I recommend using translucent or white prop foam.

Recommended post-processing:
The pieces can be glued together with superglue, I recommend using an accelerant spray to ensure a strong and quick connection.
You can also use epoxy or any other strong glue you like.

Painting instructions:
Sand your 3D prints using 100-150 grit sandpaper, with royal use of primer or filler spray inbetween to get a smooth surface. When you’re satisfied with the results, your last layer should be a primer spray, before painting it with acrylics. Protect your paintjob with a varnish spray in satin or gloss.

The 3d models are made by me. These files are packed in a ZIP folder, you need to extract the files correctly to be able to use them, if you have problems doing so, please contact me.
Non/commercial license information: You may not resell or distribute these files in any way. You may not sell 3D prints (such as raw 3d kits) made using these files, with the exception of custom (one-time) commission requests.

Disclaimer: Any rights are reserved for the copyright holders. This is a fanmade item, I am not in any way an official reseller or licensed by the relevant IP owners.