$8.00
STL 3d models for the weapons used by Academy Katarina in League of Legends. Includes a specific setup which enables the edge to be printed in transparent filament and has room for led strips to be positioned on the inside. Includes space in the handle for batteries and switch. You will need a 20mm diameter rod to add the handle.
The blade edge 3dmodel is nearly 50cm tall so you may have to print that in different pieces. I printed mine on a larger printer to eliminate seams in my clear piece.
Description
STL 3d models for the weapons used by Academy Katarina in League of Legends. Includes a specific setup which enables the edge to be printed in transparent filament and has room for led strips to be positioned on the inside. Includes space in the handle for batteries and switch. You will need a 20mm diameter rod to add the handle.
The blade edge 3dmodel is nearly 50cm tall so you may have to print that in different pieces. I printed mine on a larger printer to eliminate seams in my clear piece.
Recommended post-processing:
The pieces can be glued together with superglue, I recommend using an accelerant spray to ensure a strong and quick connection. You can use furniture wood pins in the handle for easy connection.
You can also use epoxy or any other strong glue you like.
You will need 2 rubber bands (office supplies is fine) and a ~25mm elastic band about 30cm long to finish and wear the mask.
If you want to add some type of eyes, the curvature of the eye suits a 80mm diameter transparent ball (youll have to cut out a section or its too big).
Painting instructions:
Sand your 3D prints using 100-150 grit sandpaper, with royal use of primer or filler spray inbetween to get a smooth surface. When you’re satisfied with the results, your last layer should be a primer spray, before painting it with acrylics (use glass paints or window spraypaint for clear prints). Protect your paintjob with a varnish spray in satin or gloss.
The 3d models are made by me. These files are packed in a ZIP file, you need to extract the files correctly to be able to use them, if you have problems doing so, please contact me.
Non/commercial license information: You may not resell or distribute these files in any way. You may not sell 3D prints (such as raw 3d kits) made using these files, with the exception of custom (one-time) commission requests.
Disclaimer: Any rights are reserved for the copyright holders. This is a fanmade item, I am not in any way an official reseller or licensed by the relevant IP owners.
