Ponytail frame for cosplay wigs

Printed flat, use a heatgun to warm up the plastic and shape it to the back of your head. Use the looped section towards your neck for neck support. Use the holes to sew the frame into your wig or glue the frame.
Peg included that can be inserted into a ponytail. Peg slots into the frame, with slots for 2x 12x3mm disc magnets (but slots just fine without magnets too).
Frame has a distance of 60mm from the base to the start of the ponytail. Peg has an arrow shape to easily stick into a ponytail foam base such as styrofoam or other foam shapes.

Also included:

Twintails frame (for twin tail styles that are slightly pointed towards the back, may not be suitable for perfect side-to-side above the ear twintails)
Standard ponytail cross frame (no neck support, approx 60mm from base to start of the ponytail). Has slots to use coat hanger wire or other thick iron wire to create your own wire base.
Short standard ponytail cross frame (no neck support, approx 45mm high from base to start of the ponytail)). Has slots to use coat hanger wire or iron wire to create your own wire base.

3dmodel 3dprint download frame free model ponytail stl wig