Chainmail STL for FDM printers

[featured_image]
Download
Download is available until [expire_date]
  • Version
  • Download 219
  • File Size 942.24 KB
  • File Count 1
  • Create Date 16/01/2025
  • Last Updated 16/01/2025

Chainmail STL for FDM printers

Looped chainmail STL design based on Ben Eadie's foam-cut chainmail. Ring sized to mimic standard 11mm/16gauge ring 4 weave chainmail. This type of design doesnt require supports and is very simple and fast to print. But it requires some manual assembly.
Recommended to print in TPU.
Files are in a zip folder, extract before use.

2 walls for 0.6 nozzles
3 walls for 0.4 nozzles
Do not use brim or other bed adhesion youre just giving yourself more work.
Make sure your bed is leveled properly.

Includes sheets for various bed sizes:
300x300
200x200

After printing, take off the prints with a scraper (if you pull them off you will likely warp the design)
Hook the loops into each other by pinching the loops with your finger or with a large crochet hook.
Flatten the design with heat (such as a heatgun) if necessary, it tends to curve.